Bucket mould

Bucket mould

  • Bucket in the industrial and civil are very common packages, bucket mould is our main mould series, which round bucket mould, square bucket mould, oval bucket mould, we technology has been very mature. we can making 1 cavity or 2 cavity bucket mould with 500ML, 1L, 2L, 5L, 8L, 10L, 15L, 20L, 25L.

    bucket mould maker

    Firstly, Mold Design and Structure

    A high-quality mold structure is a premise for a qualified mold before manufacturing.We attach great importance to analyze mold structure, including demolding draft angle, the epitome of product surface, gating system design, exhaust design, cooling system design etc.The main problems that may easily occur will through trial and error during the mold structure design.

    Second, the Mold Steel

    In order to improve the mold life and product quality, we increase the mold steel hardness through heat treatment. The steels we commonly use are H13(48-52HRC), 2316(45-50HRC) etc.to prevent mold eccentric, we use whole piece of steel to make the bucket. The cooling system is very important. We adopt single loop cooling way and setup even distribution water channels as much as possible. To enhance the cooling effect, BeCu can be inserted on the core and cavity. Our bucket molds use air assistance, stripper plate and centre ejector for molding (release in two steps).In order to increase cooling performance, there also have water channels in the centre.

    bucket mould maker

    All small sliders will be nitrided to increase the hardenss.

    It is important to keep maintenance for the moulds. We should check and make sure the the water channels and air circuit unlocked. Add lubricant oil for the siliders, regularly clean the stripper plate and centre ejector.

    Third, the Mold Cooling system

    Cooling system design is a relatively cumbersome work, namely to consider the uniformity of the cooling and the cooling effect, also the impact brings to the overall mold structure, determining the exact location and size of the cooling system; and cooling for key positions such as moving plate or the inserts, side sliders as well as side cores;standard cooling element design and the selection of the cooling standard components. Micon Mould analyzes all series of factors when begin to start the mold design. The mold has recycled water to flow in every part of it which reduces the cooling time, improves the production efficiency and greatly reduces products costs.

  • bucket mould maker

    bucket mould maker

    bucket mould maker

Copyright © 2017 Micon Plastic Mould Factory

Sales hotline +86 576 84136087 Whatsapp/Wechat +86153 0676 1345